Contact & Application Review

Connect directly with our technical representation desk for project reviews, drawing submittals, or factory representation discussions.

Independent Representative Notice: AMP Magnetics is an independent manufacturer’s representative. All inquiries are reviewed directly by technical personnel to match your operating parameters to qualified domestic manufacturing plants.
Direct Contact & Headquarters

Engineering & Commercial Operations

Whether you need an urgent review of a failed plant transformer, standard OEM drive reactor pricing, or a confidential principal representation meeting, we respond promptly with technical substance.

Operating Entity Applied Manufacturing Partners, LLC
Trade Name AMP Magnetics
Headquarters West Olive, Michigan, United States
Coverage Nationwide United States
Response Time Typically within one business day

Factory Principals

Looking for multi-region or nationwide representation? Please select “Manufacturer Principal” in the form to initiate a discussion.

Engineering Intake & Sourcing

Request an Application Review or Factory Match

Direct technical coordination for OEM buyers, panel builders, consulting engineers, and plant electrical leads. Five short steps — roughly two minutes.

Step 1 of 5Which best describes you?

This decides who picks the inquiry up and how quickly we can quote it.

Step 2 of 5What do you need?
Step 3 of 5Operating parameters

Partial information is fine — we will fill the gaps on the call.

The more electrical detail you give, the faster a plant can be matched.
Step 4 of 5Drawings & specifications

Optional, but a single-line or spec sheet usually removes a full round of questions.

    Add technical specs (optional) Skip this if you prefer — a few details here can save a round of questions.

    General

    Transformer type
    Not sure? Leave it on Power and describe the use in the notes.
    Size / rating
    kVA is most common. A nameplate photo or one-line works too — mention it in the notes.
    Frequency
    Max inrush %
    Skip unless you have a limit.
    Impedance %Z
    Skip unless your system study calls for a value.
    Duty cycle
    Ambient temperature
    Hottest air temperature around the unit.
    Insulation class
    Leave the default if you are unsure.
    Temperature rise
    Leave the default if you are unsure.
    Electrostatic shield
    Common for drives and sensitive electronics.
    Thermal protection (sensors / switches)
    Efficiency requirement
    e.g. DOE 2016, or leave Not specified.
    K-factor (harmonic rating)
    For loads with drives, rectifiers or lots of electronics.

    Primary

    Configuration
    Use primary taps to select secondary voltages
    Input (primary) voltage
    Include any taps you need, e.g. 480 Δ ±2×2.5%.
    Amperage
    Amperage basis
    Conductor
    Tap / termination style
    Hole size
    Hole pattern
    Hole location (from end)
    Current transformer (CT)

    Secondary

    Configuration
    Output (secondary) voltage
    e.g. 208Y/120 or 240/120.
    Voltage basis
    Amperage
    Amperage basis
    Conductor
    Tap / termination style
    Hole size
    Hole pattern
    Hole location (from end)
    Current transformer (CT)

    Enclosure

    Enclosure type
    Paint color

    Only the selected type is sent. Prefer the full form? You can complete the full spec sheet after submitting.

    Uploaded documents are stored privately and are never published to the website or shared outside the quoting process.

    Step 5 of 5Where should we send the quote?
    A quick check that confirms a person is filling this in.

    Routed to our sales desk and logged against a tracked reference number.